3M™ – Black Stripper Pad 7200 – 1 Case

3M™ Black Stripper Pads 7200 , the industry standard against which all other stripping pads are measured, provide nearly 40 percent greater initial cut than competitors and offer high performance throughout the life of the pad. Coarse fibers and abrasives provide aggressive stripping performance, removing two to three layers of old finish. The web of fibers is permeated throughout with a uniform coating of resin and abrasive mineral particles, consistently delivering impressive cut over the life of the pad. The pad’s open-textured, non-woven construction resists clogging, allowing stripping solutions to flow through the pad. The pads are approximately ¾ inch thick and sized for round and rectangular low-speed (175-600 rpm) rotary floor machines and automatic scrubbers.

Floor stripping pads remove old and soiled finish, sealer and contaminants from floor surfaces in preparation for recoating. Stripping is the first step in a maintenance program and also appropriate when scrubbing will not achieve the desired results. This remarkable stripping pad incorporates abrasive particles bonded securely to coarse fibers to provide the degree of abrasion necessary to remove the finish, yet will leave a surface smooth enough for recoating. Stripping pads are used with water-based or solvent-based stripping solutions. They can also be used with appropriate chemicals to clean heavily soiled hard-surface floors such as concrete.